Narrow Band Module Evaluation Kit
With Remote Control and Radio Modem
NB Eval Kit
 

Narrow Band Evaluation Kit (NBEK) can be used to evaluate all Narrow Band Multi-channel and Single frequency DIL version modules. Radio modules can be assessed for their suitability in terms of operating range, functionality, reliability and robustness in a multi-user environment with several other modules on different channels. Built in Control44, I1200 modes allow user to evaluate the performance of Radiometrix narrow band modules in a typical Remote Control and data transmission application in an industrial environment.

Figure 1: Main controller board + xx2M series carrier board with TR2M
 

Features

  • RF module range testing
  • Noise and Interference Identification
  • Antenna Type Evaluation
  • Analogue and digital data transmission
  • 4 Data Channel Remote Control
  • 1200 Baud Dumb Modem
  • Setup is simple as Plug-and-Play
  • RS232 Serial Port Interface for Frequency/Channel configuration
  • RS232 Serial Port Interface for 1200 baud dumb modem
  • Access to internal diagnostic/Test modes using HyperTerminal
  • Access to each data/control pins for external interface or testing

Contents

2 Controller Board
2 Carrier Boards according to Modules ordered separately
           a. BiM1, NiM2, BiM2, BiM3B, SMX1, SMX2 Carrier Board
           b. TX1M/RX1M, TX2M/RX2M, TR2M Carrier Board
           c. LMT2, LMR2 Carrier Board
           d. TLC2, RLC2 and HVR2 Carrier Board

1 Radiometrix Multichannel or Single Frequency DIL Transmitter module (ordered separately)
1 Radiometrix Multichannel or Single Frequency DIL Receiver module (ordered separately)
2 9V alkaline battery (PP3)
10 Jumpers
1 Narrow Band Evaluation Kit manual
1 Data sheet of Radio module ordered
2 1/4 wavelength monopole antenna with BNC connector for 433MHz operation
2 Helical antennas with BNC connector for 151MHz / 173MHz (optional)