UHF
Multi Channel Transparent Data Link Transceiver
TDLA2
The TDL2A is a 9600baud half-duplex multi channel
OEM radio modem in BiM2 footprint, operating on European 433MHz ISM band.
TLD2A acts as a transparent serial cable to attached host. TDL2A is an
intermediate level OEM radio modem which is in between a raw FM radio
module like BiM2 and a sophisticated OEM radio modem like SPM2. It takes
care of preamble, synchronisation, bit balancing and error checking along
with automatic noise squelching.
Figure 1: TDL2A-433-9
The TDL2A provides
a half duplex link. Provided no two devices attempt to transmit simultaneously
no further restrictions on data transmission need be made, as all transmit
timing, valid data identification and datastream buffering is conducted
by the unit. Synchronisation and framing words in the packet prevent the
receiver outputting garbage in the absence of wanted RF signal or presence
of interference. For multiple radio systems (polled networks) a TDL2A can
be set to 1 of 8 unique addresses. As well as having unique addresses, the
TDL2A allows operation on one of 5 pre-set frequencies in the 433MHz band.
These frequencies are non-overlapping and simultaneous operation of TDL2As
in the same area on different channels will be possible. Units are supplied
on 433.925MHz (Ch0) as default.
Features
Conforms to EN 300 220-3 and EN
301 489-3
High quality, stable crystal reference
Low noise synthesiser / VCO
SAW front-end filter
Multi-stage ceramic IF filtering
Single conversion superhet
Serial modem baud rate at 9600bps
(half-duplex)
Addressable point-to-point
5 serial select wideband channels
Data Present indication
Available as TDL2T transmitter and TDL2R receiver
for one way communication