You can down load the PDF files here and for those of you requiring a free version of Adobe Acrobat Reader we have a link above.

* Alarm systems and security use only

TX1 Transmitter and RX1 receiver are Narrowband VHF modules, which can operate
over 10km range. Other frequencies from 151.300MHz to 173.250MHz available to order (subject to minimum order quantity and lead time). TX1& RX1 modules are CE maked by independent notified body by complying to radio standard EN 300-220-3 and EMC standard EN 301 489-3. (TX1/RX1 datasheet)

First generation BiM and second generation BiM2 and BiM3 are Bi-directional Modules (tranceivers). These modules integrate a low power UHF FM transmitter and matching superhet receiver.( BiM - BiM2 - BiM3A datasheet)

The BiM1 is a VHF Narrow Band transceiver operating at 151.300MHz. Other frequencies from 120 to 180MHz are available to order. (BiM1data sheet)

Radio Packet Modem

The VHF Radio Packet Modem (RPM1), UHF Radio Packet Modem (RPM3) and UHF SpacePort Modem (SPM2) are low cost highly integrated intelligent serial modems which enable a radio network/link to be simply implemented between a number of digital devices. The RPM1, RPM3 and SPM2 use addressable data packets with error checking, packet acknowledgements and retransmissions to achieve a reliable invisible wireless data link. Built for ease of use and rapid installation, the serial interface ensures direct connection to microprocessors or to RS232 port via RS232 driver while remote configuration enables post installation setup of the modem. (RPM1, RPM3, SPM2 datasheet)

UHF Multi Channel Transparent Data Link Transceiver

The TDL2A is a 9600baud half-duplex multi channel OEM radio modem in BiM2 footprint, operating on European 433MHz ISM band. TLD2A acts as a transparent serial cable to attached host.( TDL2A datasheet)

Narrow Band FM multi channel radio modules with built-in modem

The RX2M receiver, TX2M transmitter and TR2M transceiver modules offer a low power, reliable data link in an industry-standard pin out and footprint. This makes the TX2M/RX2M and TR2M pairs ideally suited to those low power applications where existing wideband modules have insufficient range, or where multi-channel operation is needed. Two versions are available, covering the 458.5-458.8MHz UK band (at 100mW) and the European 433.05-434.79MHz band.
(TX2M/RX2M, TR2M transceiver data sheet)

First generation radio modules*

*Not recommended for new designs. These modules will remain in production for existing customers. (TXM - SILRX - RXM datasheet)

Limitation of Liability

The information furnished by Radiometrix Ltd. is believed to be accurate and reliable. Radiometrix reserves the right to make changes or improvements in the design, specification or manufacture of its subassembly products without notice. Radiometrix does not assume any liability arising from the application or use of any product or circuit described herein, nor for any infringements of patents or other rights of third parties which may result from the use of its products. This data sheet neither states nor implies warranty of any kind, including fitness for any particular application. These radio devices may be subject to radio interference and may not function as intended if interference is present. We do NOT recommend their use for life critical applications.

Radio and EMC Regulations

The Intrastat commodity code for all our modules is : 8542 6000. The purchaser of Radiometrix sub-assemblies must satisfy all relevant EMC and radio regulations which applies to their finished products. Information regarding EMC regulations and type approval please refer to following URLs