Control, RF Encoder-Decoder ICs

BD118

These simple application boards use firmware based on the familiar CTA88 remote control systems to implement a bi-directional control link.

BL118

Bi-directional low power RF Remote Control application boards

These simple application boards use firmware based on the BD118 remote control systems to implement a bi-directional control link.

CTA88

8 bit Address - 8 bit Data encoder/decoder

CTA88 is an 8 bit address, 8 bit data encoder and decoder combined in a single IC. This device is intended to be used with ISM band telemetry modules and can be operated in either Encode or Decode mode.

CTR124

CTR124: 4 bit Address - 12 bit Data Encoder / Decoder

Control124 is a 4 bit address, 12 bit data encoder and decoder combined in a single IC. This device can operate in either Encode or Decode mode. It uses 1kbps differential Manchester bit balancing with preamble and checksum.

CTR44

CTR44: 4 bit Address - 4 bit Data Encoder / Decoder

Control44 is a 4 bit address, 4 bit data encoder and decoder combined in a single IC. This device can operate in either Encode or Decode mode. It uses 1kbps differential Manchester bit balancing with preamble and checksum.

KRX416

Code-hopping decoder with 4 outputs

• Single IC solution for decrypting & decoding code-hopping transmitters

• Will retain identities of up to 16 code-hopping transmitters, even when power supply removed

• Designed for use in RF keyless remote control applications.