Transceivers

BiM1

VHF Narrow Band FM transceiver

The BiM1 transceiver modules offer a 100mW RF output VHF data link in Radiometrix transceiver standard pin-out and footprint.

BiM1H

VHF Narrowband Transceiver

The BiM1H transceiver modules offer a 500mW RF output VHF data link in Radiometrix transceiver standard pin-out and footprint.

BiM3H

UHF FM 400mW transceiver module

The BIM3H UHF radio data transceiver allows the simple implementation of data links at speeds up to 10kbps and distances up 5000 metres over open ground.

NiM2

UHF Narrow Band FM Transceiver

• Licence-exempt operation in the 433MHz EU band

• Can be used in existing low data rate (<10kbps) applications where the operating range of the system using wide band transceivers need to be extended.

NTR2

UHF Narrow Band FM Transceiver

• Available for licence-exempt operation in the 433MHz (EU) and 458MHz (UK) bands.

• Data rates up to 10kbps

• Transmit power: +10dBm (10mW)

• Usable range over 500m.

BHX2

NBFM Multi-channel 500mW UHF Transceiver

• Offers a 500mW RF power output in the UK 458MHz band.

• Ideally suited to those low power applications where existing multichannel narrow band devices like TR2M have insufficient range

BiM2

433MHz high speed FM radio transceiver module

The BiM2 transceiver is an enhanced replacement for our original BiM module. It offers greater transmit power, higher data rates, greatly improved receiver interference rejection and a lower profile. The module is ideal for...

BiM2A

433MHz Wide Band FM radio transceiver (BiM2H and BiM2EH)

BiM2A is half-duplex crystals controlled PLL wideband FM transceiver operating on 433.05-434.79MHz European SRD band.

BiM2G / BiM3G

The BIM2/3G data radio module is a PLL synthesiser based miniature PCB mounting UHF radio transceiver which enable the simple implementation of a wireless data link at up to 128 kbps at distances up to 75 metres in-building and 300 metres open ground.

BiM3A

869/914MHz high speed FM radio transceiver module

The BiM3A radio transceiver module is similar in size and pinout to the BiM2, offering all the advantages of the latter but with reduced power consumption and antenna size. The BiM3A replaces the obsolete BiM3.