The CVR1 receiver modules offers a low cost, reliable data link in a Radiometrix BiM standard pin out and footprint. Available in 173.225MHz frequency as standard. Compatible with the Radiometrix TX1 and BiM1T transmitters.
The NRX1 is a VHF radio data receiver and it offers a low power, reliable data link in a Radiometrix SIL standard pin out and foot print. It is an enhanced, low cost version of the Radiometrix RX1, but in a slightly larger dimension.
The RX1L receiver modules have very low current consumption (1mA). Two versions on the 151.300MHz and 173.225MHz frequencies are available. Compatible with the Radiometrix TX1 and BiM1T transmitters.
The UHF RX2G radio receiver and TX2A transmitter pair which enable the simple implementation of a wireless data link at up to 64 kbps at distances up to 75 metres in-building and 300 metres open ground.
The COR3 is a 25kHz channel narrowband receiver intended for European 868MHz band Non-Specific SRD applications. The module offers a low power, reliable data link in an industry-standard pin out and footprint.
The ENR1 is a miniature PCB mounting VHF radio data receiver. It is a narrowband 12.5KHz spacing receiver incorporating a received signal strength indicator (RSSI). It allows the simple implementation of data links at speeds up to 5kbps.
UHF Narrow Band FM Vibration immune Multi Channel Receiver
The HVR2 receiver is the high vibration resistant version of the low cost RLC2H receiver. Its unique local oscillator design makes the unit almost immune to mechanical vibrations below 500Hz