500mW RF power amplifier module
Antennas / Accessories, High Power
Australia, Europe, Far East, North America, United Kingdom
≤10kbps
>100–≤500mW
433MHz Wideband FM radio transceiver
Single Channel, Transceivers, Wideband
Australia, Europe, Far East, North America, United Kingdom
>10kbps, ≤10kbps, up to 40kbps, up to 64kbps
10–≤100mW
Frequency Programmable FM UHF Transceiver
Single Channel, Transceivers, Wideband
Australia, Europe, Far East, North America, United Kingdom
up to 64kbps
10–≤100mW
The BiM2E is a half-duplex crystal controlled wideband FM tranceiver opeating on 433.92MHz (in the European SRD band)...
Single Channel, Transceivers, Wideband
Australia, Europe, Far East, North America, United Kingdom
>10kbps, ≤10kbps, up to 64kbps
≤10mW
The BiM2G is a half-duplex 433.92MHz wideband transceiver module combining a low-power transmitter and high-sensitivity receiver on a single PCB. Designed for high-speed bi-directional data transfer, it provides a complete wireless link for multi-node telemetry and control.
Single Channel, Transceivers, Wideband
Australia, Europe, Far East, North America, United Kingdom
>10kbps, ≤10kbps, up to 160kbps, up to 40kbps, up to 64kbps
≤10mW
19200 baud Modem Transceiver
Modems, Transceivers
Australia, Europe, North America, United Kingdom
>10kbps
≤10mW
2700 baud wireless packet modem
Modems, Single Channel, Transceivers
Australia, Europe, Far East, North America, United Kingdom
≤10kbps
≤10mW
The CXR2 is a double-conversion, PLL-synthesised multichannel UHF FM receiver operating across 400MHz–470MHz allocations at data rates up to 20kbps. Combining dynamic serial channel switching with high adjacent-channel selectivity and blocking performance, it provides dependable reception in congested industrial RF environments alongside the CXT2 transmitter.
Control, Multichannel, Narrow Band, Receiver
The CXT2 is a PLL-synthesised multichannel UHF FM transmitter covering 400MHz–470MHz allocations with data rates up to 20kbps. Built for frequency-agile telemetry networks requiring dynamic channel switching and superior spectral purity, it forms a matched narrowband link when paired with the CXR2 receiver.
Control, Multichannel, Narrow Band, Transmitter
10–≤100mW
DX series remote control boards
Control, Eval Kits
Australia, Europe, Far East, North America, United Kingdom
≤10mW
NBFM Multi-channel 500mW UHF Transmitter
High Power, Multichannel, Narrow Band, Transmitter
Australia, Europe, Far East, North America, United Kingdom
up to 5 kbps
>100–≤500mW
High power Narrow band Modem UHF
High Power, Modems, Multichannel, Narrow Band
Europe, United Kingdom
>10kbps
>100–≤500mW
Code hopping receiver with up to 5 relay outputs
Control, Receiver, Single Channel, Wideband
Australia, Europe, Far East, North America, United Kingdom
UHF code hopping remote control keyfob transmitter
Control, Single Channel, Wideband, Transmitter
Australia, Europe, Far East, North America, United Kingdom
≤10mW
UHF FM Code-Hopping Receiver Module
Control, Receiver, Single Channel, Wideband
Australia, Europe, Far East, North America, United Kingdom
UHF FM Code-Hopping Data Transmitter
Control, Single Channel, Wideband, Transmitter
Australia, Europe, Far East, North America, United Kingdom
≤10mW
UHF Low Cost multi channel radio receiver
Multichannel, Narrow Band, Receiver
Australia, Europe, Far East, North America, United Kingdom
up to 5 kbps
The LMT2 is a compact, low-power multichannel sub-GHz FM transmitter supporting 433.92MHz, 868MHz, and 915MHz ISM bands at data rates up to 40kbps. Offering dynamic serial channel selection and clean spurious suppression to avoid co-channel interference, it pairs seamlessly with the LMR2 receiver for multi-channel wireless telemetry.
Multichannel, Narrow Band, Transmitter
Australia, Europe, Far East, North America, United Kingdom
up to 10 kbps
10–≤100mW