Multichannel

HVR2

UHF Narrow Band FM Vibration immune Multi Channel Receiver

The HVR2 receiver is the high vibration resistant version of the low cost RLC2H receiver. Its unique local oscillator design makes the unit almost immune to mechanical vibrations below 500Hz

LMR1

VHF NBFM Low Cost multi channel radio receiver

The LMT1 transmitter and matching LMR1 receiver modules offer a multi channel, low power, and reliable VHF data link

LMR2

UHF NBFM Low Cost multi channel radio receiver

The LMT2 transmitter and LMR2 receiver modules offer a multi channel, low power, and reliable data link.

LMT2

UHF NBFM Low Cost multi channel radio transmitter

The LMT2 transmitter and LMR2 receiver modules offer a multi channel, low power, and reliable data link.

MSR3

The MSR3 is a 25kHz channel narrowband receiver intended for European 868MHz band Non-Specific SRD applications. The module offers a low power, reliable data link in an industry-standard pin out and footprint.

PLR2

NBFM Multichannel Data Packet Link Receiver

The PL modules use the hardware of the existing LMT/LMR transmitter receiver pair, combined with completely new firmware to produce a simple to use but readily controllable data link

PLT2

NBFM Multichannel Data Packet Link Transmitter

The PL modules use the hardware of the existing LMT/LMR transmitter receiver pair, combined with
completely new firmware to produce a simple to use but readily controllable data link

QPT1

VHF Narrow Band FM 2 Watt Multi-channel transmitter

• Aluminium extruded casing, or smaller footprint PCB mounted shield can.

• Suitable for licensed & unlicensed VHF allocations, FCC part 90 operation

• With LMR1 or RX1M receiver over 10km range achievable (with suitable antenna)

QPX1

2 Watt Multi-channel VHF Transceiver

• 2 watt RF output VHF radio link

• Robust aluminium extruded casing.

• Multi-channel, narrowband design

• Suitable for licensed and unlicensed VHF allocations, FCC part 90 operation, and the 2M amateur band.

RDL2

UHF Multi Channel Wide Band FM Transceiver

RDL2 is a half-duplex multi channel wideband FM transceiver in a BiM series footprint and operates on 433.05-434.79MHz European SRD band.
This makes the RDL2 ideally suited to those low power applications where low cost multi-channel operation is required.